web analytics

100% Pass IT Exam By Training Lead2pass New VCE And PDF Dumps

100% Pass Lead2pass Practice Test Free Version

Free Sharing Of Microsoft 70-740 Brain Dumps From Lead2pass:

https://www.lead2pass.com/70-740.html

QUESTION 41
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

Your network contains an Active Directory forest.
You install Windows Server 2016 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: From a Group policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines.
Does this meet the goal?

A.    Yes
B.    No

Answer: B
Explanation:
An application control policy is used to allow/disallow certain programs from running on a client, not for configuring roles.

QUESTION 42
You have a server named Server 1 thai runs Windows Server 2016.
Server 1 has Internet connectivity. You have a Nano Server image.
You need to download and save a Nano Server package in the Nano Server image.
The package is NOT included in the Windows Server 2016 installation media.
Which two cmdlets should you run on Server1?

A.    Set-PaekageSource
B.    Install-PackageProvider
C.    Add-AppxProvisioncdPackage
D.    Save-NanoServer
E.    Package Add WindowsPackage

Answer: BD

QUESTION 43
You have four servers named Server 1, Server2, Server3 and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.
To each server, you attach a new 4 TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct.
The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?

A.    Add-ClusterSharedVolume -Name “Disk 1” -Cluster Cluster 1
B.    New-Cluster -Name Clusterl -Node ‘Server1’, Server2, Server3 , Server4 -NoStorage
C.    Get-ClusterAvailableDisk -Cluster Clusterl | Add-ClusterDisk
D.    New-ClustcrStorageEnclosure -id 1 -name Cluster 1 -type jbod -ConnectionString Serverl,Server2.Server3,Server4

Answer: B
Explanation:
Before enabling StorageSpacesDirect, you must create a new cluster using the New-Cluster command.

QUESTION 44
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual machine named VM1 that uses a single VHDX file.
VM1 is configured shown in the following table.

441

You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines.
You need to ensure that VM1 can be used to deploy shielded virtual machines.
What should you run?

A.    the Mount-VHD cmdlet
B.    the Diskpart command
C.    the Set-VHD cmdlet
D.    the Set-VM cmdlet
E.    the Set-VMHost cmdlet
F.    the Set-VMProcessor cmdlet
G.    the Install-WindowsFeature cmdlet
H.    the Optimize-VHD cmdlet

Answer: B

QUESTION 45
In this section, you’ll see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

451

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution From a Group Policy object (GPO) in tne domain, you modify the Network List Manager Policies.
Does this meet the goal?

A.    Yes
B.    No

Answer: B

QUESTION 46
In this section, you’ll see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.

461

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel.
Does this meet the goal?

A.    Yes
B.    No

Answer: A

QUESTION 47
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of- business application named App1.
App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a performance counter data collector.
Does this meet the goal?

A.    Yes
B.    No

Answer: B
Explanation:
To log a memory event based on a data collector, you will use the trace type of collector.
Counter type is used to record data for a period of time.

QUESTION 48
You have an Active Director domain named Contoso.com. The domain contains servers named Server 1, Server2 and Server3 that run Windows Server 2016.
Server1 and Server2 are nodes in a Hyper V cluster named Cluster1.
You add a Hyper V Replica Broker role named Broker 1 to Cluster 1.
Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3.
Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only.
You need to ensure that you can perform the migration of VM1 to Server2.
What should you do?

A.    Modify the Storage Migration settings on Server3
B.    Modify the Cluster Permissions for Cluster1.
C.    Add the Server3 computer account to the Replicator group on Server1 and Server2.
D.    Modify the Delegation settings for the Server3 computer account.

Answer: D

70-740 dumps full version (PDF&VCE): https://www.lead2pass.com/70-740.html

Large amount of free 70-740 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDMXFQVl9VSWx5WGs

You may also need:

70-741 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDb05IRmRaei1JLVE

70-742 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDRWlFSW1vN0JwT3M

70-743 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdjVzVlJxOXB5TTg

70-744 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDVExYaWZyTWt4OGc

May 9th, 2018

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

70-740 Latest Dumps Free Download From Lead2pass:

https://www.lead2pass.com/70-740.html

QUESTION 31
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question

You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand- alone Hyper-V host named Server1 at a secondary location.
A virtual machine named VM1 runs on Cluster1.
You configure a Hyper-V Replica of VM1 to Server1.
You need to perform a Test Fai lover of VM1.
Which tool should you use?

A.    the clussvc.exe command
B.    the cluster.exe command
C.    the Computer Management console
D.    the configurehyperv.exe command
E.    the Disk Management console
F.    the Failover Cluster Manager console
G.    the Hyper-V Manager console
H.    the Server Manager Desktop app

Answer: G

QUESTION 32
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016.
All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices.
Which component should you install?

A.    the Multipath I/O feature
B.    the Routing role service
C.    the Network Controller server role
D.    the Canary Network Diagnostics feature
E.    the Data Center Bridging feature

Answer: CE

QUESTION 33
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1.
What should you run on Server1?

A.    the Mount-VHD cmdlet
B.    the Diskpart command
C.    the Set-VHD cmdlet
D.    the Set-VM cmdlet
E.    the Set-VMHost cmdlet
F.    the Set-VMProcessor cmdlet
G.    the Install-WindowsFeature cmdlet
H.    the Optimize-VHD cmdlet

Answer: F

QUESTION 34
Your network contains a new Active Directory domain named contoso.com.
You have a security policy that states that new servers should run Nano Server whenever possible.
Which server role can be deployed on a Nano Server?

A.    Active Directory Domain Services
B.    DHCP Server
C.    Network Policy and Access Services
D.    Web Server (IIS)

Answer: D
Explanation:
A nano server cannot be ADDS, NPAS, or DHCP server. Recommended role is IIS Web Server.

QUESTION 35
You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1.
VM1 has resource metering enabled.
You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.
Which cmdlet should you run?

A.    Add-VMNetworkAdapteiAd
B.    Set-VMNetworkAdapter
C.    New-VMResourcePool
D.    Set-VMNetworkAdapterRoutingDomamMapping

Answer: A
Explanation:
Use the Add-VMNetworkAdapterACL command to specify which network to enable Resource Metering on.
If no ACLs are specified, metering will occur on all available networks.

QUESTION 36
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question

You have a Hyper-V host named Server1 that runs Windows Server 2016.
You plan to deploy several shielded virtual machines on Server1.
You deploy a Host Guardian on a new server.
You need to ensure that Server1 can host shielded virtual machines.
What should you run first?

A.    the Mount-VHD cmdlet
B.    the Diskpart command
C.    the Set-VHD cmdlet
D.    the Set-VM cmdlet
E.    the Set-VMHost cmdlet
F.    the Set-VMProcessor cmdlet
G.    the Install-WindowsFeature cmdlet
H.    the Optimize-VHD cmdlet

Answer: G

QUESTION 37
You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

A.    the dns.exe command
B.    the optionalfcaturcs.exe command
C.    the Install-Package cmdlet
D.    the Enable-WindowsOptionalFeature cmdlet

Answer: D
Explanation:
Enable-WindowsOptionalFeature is used to add DNS role to a Nano Server.

QUESTION 38
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2.
What should you do?

A.    RunNew-SRPartnershipand specify the -RephcationModeparameter.
B.    install the Failover Clustering feature and create a new cluster resource group.
C.    Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D.    RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter

Answer: A

70-740 dumps full version (PDF&VCE): https://www.lead2pass.com/70-740.html

Large amount of free 70-740 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDMXFQVl9VSWx5WGs

You may also need:

70-741 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDb05IRmRaei1JLVE

70-742 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDRWlFSW1vN0JwT3M

70-743 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdjVzVlJxOXB5TTg

70-744 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDVExYaWZyTWt4OGc

March 22nd, 2018

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

100% Free Lead2pass 70-740 New Questions Download:

https://www.lead2pass.com/70-740.html

QUESTION 21
You have an Active Directory domain named Contoso.com.
The domain contains servers named Server1 and Server2 that run Windows Server 2016.
You install the Remote Access server role on Server1.
You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?

A.    From Routing and Remote Access, configure the authentication provider.
B.    From the Connection Manager Administration Kit, create a Connection Manager profile
C.    From Server Manager, create an Access Policy.
D.    From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account. (more…)

February 2nd, 2018

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

Lead2pass 70-740 Dumps PDF Free Download:

https://www.lead2pass.com/70-740.html

QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd. Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

111

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host3 and Host4.
Does this meet the goal?

A.    Yes
B.    No

Answer: B
Explanation:
Virtual switches must match for Live Migration.

QUESTION 12 70-740 Dumps,70-740 Exam Questions,70-740 New Questions,70-740 VCE,70-740 PDF
You need to ensure that VM1 and VM2 can communicate with each other only.
The solution must prevent VM1 and VM2 from communicating with Server1.
Which cmdlet should you use?

A.    Set-NetNeighbor
B.    Remove-VMSwitchTeamMember
C.    Set-VMSwitch
D.    Enable-VMSwitchExtension

Answer: C

QUESTION 13 70-740 Dumps,70-740 Exam Questions,70-740 New Questions,70-740 VCE,70-740 PDF
You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named Node1 and Node2.
On Node1, you create a virtual machine named VM01 by using Hyper-V Manage.
You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable.
What should you do?

A.    From Failover Cluster manager, run the configure Role actions.
B.    From Hyper-V Manager, click VM01 and click Enable Replication.
C.    From Hyper-V Manager Click Node 1 and the modify the hyper-V settings.
D.    From Windows Powershell, run the Enable-VMReplication cmdlet.

Answer: A
Explanation:
Automatic failover in a cluster is configured from Failover Cluser Manager.

QUESTION 14 70-740 Dumps,70-740 Exam Questions,70-740 New Questions,70-740 VCE,70-740 PDF
You have a server named Served that runs Windows Server 2016. Server1 will be used as a VPN server.
You need to configure Server1 to support VPN Reconnect.
Which VPN protocol should you use?

A.    PPTP
B.    L2TP
C.    SSTP
D.    lKEv2

Answer: D

QUESTION 15 70-740 Dumps,70-740 Exam Questions,70-740 New Questions,70-740 VCE,70-740 PDF
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of- business application named App1.
App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a system configuration information data collector.
Does this meet the goal?

A.    Yes
B.    No

Answer: B

QUESTION 16 70-740 Dumps,70-740 Exam Questions,70-740 New Questions,70-740 VCE,70-740 PDF
You have a server named Server1 that runs Windows Server 2016.
You install the Docker daemon on Server1.
You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?

A.    Run theNew-NetFirewallRulecmdlet
B.    Run theSet-ServiceWindows PowerShell cmdlet.
C.    Edit the daemon.json file.
D.    Edit the configuration json file

Answer: C

QUESTION 17 70-740 Dumps,70-740 Exam Questions,70-740 New Questions,70-740 VCE,70-740 PDF
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, yon will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers.
You need to configure the network cards on the servers for the planned NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have static IP addresses.
You configure the cluster to use unicast.
Does this meet the goal?

A.    Yes
B.    No

Answer: A

QUESTION 18 70-740 Dumps,70-740 Exam Questions,70-740 New Questions,70-740 VCE,70-740 PDF
You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 contains four virtual machines that are configured as shown in the following table.

181

To which machine or machines can you connect by using Virtual Machine Connection from Hyper-V Manager?

A.    VM1, VM2, VM3 and VM4
B.    VM4 only
C.    VM1 and VM2 only
D.    VM3 and VM4 only
E.    VM2 only

Answer: D
Explanation:
Virtual Machine Connection cannot be used to connected to Shielded Virtual Machines.

70-740 dumps full version (PDF&VCE): https://www.lead2pass.com/70-740.html

Large amount of free 70-740 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDMXFQVl9VSWx5WGs

You may also need:

70-741 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDb05IRmRaei1JLVE

70-742 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDRWlFSW1vN0JwT3M

70-743 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdjVzVlJxOXB5TTg

70-744 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDVExYaWZyTWt4OGc

December 29th, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 October Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass has updated the latest version of Microsoft 70-740 exam, which is a hot exam of Microsoft certification. It is Lead2pass Microsoft 70-740 exam dumps that give you confidence to pass this certification exam in first attempt and with maximized score.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-740.html

QUESTION 141
You have two servers named Server1 and Server2 that run Windows Server 2016.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 ………..
Which cmdlet should you run?

A.    New-NetQosPolicy
B.    Set-NetworkController
C.    New-NetTransportFilter
D.    New-StorageQosPolicy

(more…)

October 30th, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 October Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

How to 100% pass 70-740 exam? Lead2pass 70-740 dump is unparalleled in quality and is 100% guaranteed to make you pass 70-740 exam. All the 70-740 exam questions are the latest. Here are some free share of Microsoft 70-740 dumps.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-740.html

QUESTION 131
You deploy two servers that run Windows Server 2016.
You install the Failovers Clustering feature on both servers.
You need to create a workgroup cluster.
What should you do?

A.    Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of None.
B.    Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
C.    Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
D.    Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of None.

(more…)

October 30th, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 October Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

The 70-740 braindumps are the latest, authenticated by expert and covering each and every aspect of 70-740 exam. Comparing with others, our exam questions are rich in variety. We offer PDF dumps and 70-740 VCE dumps. Welcome to choose.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-740.html

QUESTION 121
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com.
The functional level of the forest and the domain is Windows Server 2008 R2.
All servers in the domain run Windows Server 2016 Standard.
The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

(more…)

October 30th, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 October Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

How to 100% pass 70-740 exam? Lead2pass provides the guaranteed 70-740 exam dumps to boost up your confidence in 70-740 exam. Successful candidates have provided their reviews about our 70-740 dumps. Now Lead2pass supplying the new version of 70-740 VCE and PDF dumps. We ensure our 70-740 exam questions are the most complete and authoritative compared with others’, which will ensure your 70-740 exam pass.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-740.html

QUESTION 111
For Windows Server 2016, Nano Server is distributed on the physical media, where you will find a NanoServer folder; this contains a .wim image and a subfolder called Packages. It is these package files that you use to add server roles and features to the VHD image, which you then boot to.
Assume that several variables have been configured already, which PowerShell command would you use to create a Nano Server which had the Hyper-V role, clustering, OEM Drivers and antimalware?

A.    New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName $computername -OEMDrivers -Clustering -Defender -Compute
B.    New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath – ComputerName $computername -OEMDrivers -Clustering -Storage – EnableRemoteManagementPort
C.    New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath – ComputerName $computername -OEMDrivers -Defender -Containers – EnableRemoteManagementPort
D.    New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName $computername -Defender -Storage -Compute – EnableRemoteManagementPort

(more…)

October 30th, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 October Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Test your preparation for Microsoft 70-740 with these actual 70-740 new questions below. Exam questions are a sure method to validate one’s preparation for actual certification exam.

Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-740.html

QUESTION 101
Which container type is described below:
Provides application isolation through process and namespace isolation technology.
This container shares a kernel with the container host and all containers running on the host.

A.    Hyper-V Container
B.    Windows Server Container

(more…)

October 29th, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass is constantly updating 70-740 exam dumps. We will provide our customers with the latest and the most accurate exam questions and answers that cover a comprehensive knowledge point, which will help you easily prepare for 70-740 exam and successfully pass your exam. You just need to spend 20-30 hours on studying the exam dumps.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 61
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have three servers named Server1, Server2, Server3 that run Windows Server 2016.
Server1 and Server2 have the Hyper-V server role installed. Server3 has the iSCSI Target Server role service installed.

 

You need to create a Hyper-V cluster.
Which tool should you use first?

A.    the clussvc.exe command
B.    the cluster.exe command
C.    the Computer Management console
D.    the configurehyperv.exe command
E.    the Disk Management console
F.    the Failover Cluster Manager console
G.    the Hyper-V Manager console
H.    the Server Manager Desktop app

(more…)

June 2nd, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

In recent years, many people choose to take Microsoft 70-740 certification exam which can make you get the Microsoft certificate and that is the passport to get a better job and get promotions. How to prepare for Microsoft 70-740 exam and get the certificate? Please refer to Microsoft 70-740 exam questions and answers on Lead2pass.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 51
Your network contains an Active Directory forest named contoso.com.
The forest contains a member server named Server1 that runs Windows Server 2016.
Server1 is located in the perimeter network.
You install the Active Directory Federation Services server role on Server1.
You create an Active Directory Federation Services (ADFS) farm by using a certificate that has a subject name of sts.contoso com.
You need to enable certificate authentication from the Internet on Server1.
Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution.

A.    389
B.    443
C.    3389
D.    8531
E.    49443

(more…)

June 2nd, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Our PDF dumps of 70-740 exam is designed to ensure everything which you need to pass your exam successfully. At Lead2pass, we have a completely customer oriented policy. We invite the professionals who have rich experience and expert knowledge of the IT certification industry to guarantee the PDF details precisely and logically. Our customers’ time is a precious concern for us. This requires us to provide you the products that can be utilized most efficiently.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 41
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

Your network contains an Active Directory forest.
You install Windows Server 2016 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: From a Group policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines.
Does this meet the goal?

A.    Yes
B.    No

(more…)

June 2nd, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Good news, Lead2pass has updated the 70-740 exam dumps. With all the questions and answers in your hands, you will pass the Microsoft 70-740 exam easily.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 31
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question

You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand- alone Hyper-V host named Server1 at a secondary location.
A virtual machine named VM1 runs on Cluster1.
You configure a Hyper-V Replica of VM1 to Server1.
You need to perform a Test Fai lover of VM1.
Which tool should you use?

A.    the clussvc.exe command
B.    the cluster.exe command
C.    the Computer Management console
D.    the configurehyperv.exe command
E.    the Disk Management console
F.    the Failover Cluster Manager console
G.    the Hyper-V Manager console
H.    the Server Manager Desktop app

(more…)

June 2nd, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Pass 70-740 exam with the latest Lead2pass 70-740 dumps: Lead2pass 70-740 exam questions and answers in PDF are prepared by our experts. Moreover, they are based on the recommended syllabus that covering all the 70-740 exam objectives.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 21
You have an Active Directory domain named Contoso.com.
The domain contains servers named Server1 and Server2 that run Windows Server 2016.
You install the Remote Access server role on Server1.
You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?

A.    From Routing and Remote Access, configure the authentication provider.
B.    From the Connection Manager Administration Kit, create a Connection Manager profile
C.    From Server Manager, create an Access Policy.
D.    From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

(more…)

June 1st, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass provides 100% pass 70-740 exam questions and answers for your Microsoft 70-740 exam. We provide Microsoft 70-740 exam questions from Lead2pass dumps and answers for the training of 70-740 practice test.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd. Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

 

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host3 and Host4.
Does this meet the goal?

A.    Yes
B.    No

(more…)

June 1st, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

I’m currently studying for Microsoft exam 70-740 I do enjoy studying for exams. It’s hard, but it’s an excellent forcing function. I learn bits and pieces here and there now and then about this and that, but when I have an exam schedule for a set date, I have to study! And not only do I put in more hours, but I follow a more systematic approach. In this article, I’m going to share Lead2pass braindumps in case you too are studying and this method works for you.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 1
You have a server named Server 1 that runs Windows Server 2016 and has the Hyper-V server role installed.
On Server1, you plan to create a virtual machine named VM1.
You need to ensure that you can start VM1 from the network.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

A.    Create a generation 2 virtual machine.
B.    Create a generation 1 virtual machine and run the Enable-NetAdapterPackageDirect cmdlet.
C.    Create a generation 1 virtual machine that has a legacy network adapter.
D.    Create a generation 1 virtual machine and configure a single root I/O virtualization (SRV-IO) interface for the network adapter.

(more…)

June 1st, 2017

Posted In: 70-740 Dumps, 70-740 Exam Questions, 70-740 New Questions, 70-740 PDF, 70-740 VCE, Microsoft Exam

Tags: , , , , , , ,

Pages:  1 2 Next Page »